Toko Tech Bulletin: Summer Storage Waxing

TokoApril 19, 2013

Summer Storage Waxing

Here are Toko’s recommendations for storage waxing of skis. First clean the skis well. This can be done with wax remover or by simply brushing the bases out well with a copper brush depending on how dirty they are. Then drip on a generous amount of NF or LF Red. Iron it in making sure that there is enough wax to provide a thick layer on the base and that the iron is hot enough to ensure a good bond between the wax and the base. This ironing procedure is normal, but sometimes a person rushes through storage waxing and the wax is not really heated outside of that it becomes liquid. The ski bases often times don’t even become warm. This will result in air between the base and the ski and less protection.

Red is our choice for storage waxing as Blue is so hard that it is more difficult to make sure that there is no air between the ski and base and Yellow is so soft that it gets “eaten away” quicker. NF or LF Red is perfect because their consistency is perfect.

If waxing Alpine skis, slop the wax over the edges and cover them too.

A SUMMARY:

1. Brush skis out well with Copper Brush

2. Iron in System3 Red or LF Red making sure adequate wax is used and that the wax is heated in well.

Loading Facebook Comments ...

Leave a Reply